OPTIMAL CONTROL OF THE MOTION OF FAN DRIVE MECHANISMS OF A COTTON-PICKING MACHINE
- Authors
-
-
J. Norqulov
Research Institute for the Development of Digital Technologies and Artificial Intelligence, junior research fellow, PhD -
D. Aroyev
Kokand State University, Associate Professor of the Department of Mathematics, PhD, Associate Professor
-
- Keywords:
- pneumatic system drive hydraulic motor hydraulic pump optimal control
- Abstract
-
The article formulates the equations of motion of the drives of the pneumatic system of technological machines. Based on the obtained equations of motion, algorithms for optimal control of the drives of the pneumatic system have been developed. Using Pontryagin's maximum principle, the necessary conditions for optimal control of the motion of the drives of the pneumatic system have been studied. By solving the coupled systems, the optimal values of the stiffness coefficients, the viscous resistance of the drive belts, and the moments of inertia corresponding to the rotating mechanisms of the pneumatic system have been found. The values of transient processes and torsional vibrations during the startup process of the pneumatic system drives have been determined.
- References
-
[1] A. D. Abdazimov, N. N. Omonov, and M. T. Khudayorov, “Justification of the parameters of the information model of the automatic guidance system of the cotton harvester,” IOP Conference Series: Earth and Environmental Science, vol. 1076, Art. no. 012002, pp. 3–6, 2022.
[2] B. M. Azimov, G. A. Bakhadirov, and L. F. Sulyukova, “Modeling and control of the operation of the drive of a roller technological machine,” in Proc. Republican Scientific and Technical Conference “Current State and Prospects for the Use of Information Technologies in Management”, Tashkent, Uzbekistan, Sep. 5–6, 2017, pp. 83–89.
[3] B. M. Azimov and Sh. Z. Ikhsanova, “Motion simulation and calculation of the components of the lateral forces of the guiding wheels of a cotton-harvesting machine,” Tractors and Agricultural Machinery, vol. 90, no. 2, pp. 107–115, 2023.
[4] B. M. Azimov and S. A. Mukhametov, Problems of Informatics and Energy, no. 4, pp. 43–59, 2021.
[5] V. N. Afanasyev, V. B. Kolmanovskiy, and V. R. Nosov, Matematicheskaya teoriya konstruirovaniya sistem upravleniya [Mathematical Theory of Control System Design]. Moscow, Russia: Vysshaya Shkola, 2003, p. 613.
[6] American Society of Agricultural and Biological Engineers, ASABE Standards: Hydraulic Components and Test Procedures. St. Joseph, MI, USA: ASABE, 2017, pp. 1–2.
[7] B. M. Azimov, G. A. Bakhadirov, and L. F. Sulyukova, “Modeling and control of the operation of the drive of a roller technologicasssl machine,” in Proc. Republican Scientific and Technical Conference “Current State and Prospects for the Use of Information Technologies in Management”, Tashkent, Uzbekistan, Sep. 5–6, 2017, pp. 83–89.
[8] B. M. Azimov, A. R. Ruzikulov, M. B. Azimov, and J. Sh. Norkulov, “Modelirovanie, optimal’noe upravlenie dvizheniem i otsenki energeticheskogo sostoyaniya chetyrekhkolesnogo traktora” [Modeling, optimal motion control, and assessment of the energy state of a four-wheel tractor], Problems of Informatics and Energy, no. 3, pp. 14–15, 2019.
[9] B. M. Azimov, D. K. Yakubzhanova, and S. T. Kubaev, Matematicheskie modeli i algoritmy upravleniya khlopkouborochnymi mashinami pri razlichnykh usloviyakh dvizheniya [Mathematical Models and Control Algorithms for Cotton Harvesting Machines under Various Motion Conditions]. Tashkent, Uzbekistan: Fan va Texnologiyalar Nashriyot-Matbaa Uyi, 2022, p. 136.
[10] V. N. Afanasyev, V. B. Kolmanovskiy, and V. R. Nosov, Matematicheskaya teoriya konstruirovaniya sistem upravleniya [Mathematical Theory of Control System Design]. Moscow, Russia: Vysshaya Shkola, 2003, p. 613.
[11] F. P. Vasiliev, Chislennye metody resheniya ekstremal’nykh zadach [Numerical Methods for Solving Extremal Problems]. Moscow, Russia: Nauka, 1988, p. 551.
[12] V. B. Popov, Gidroprivod mobil’nykh sel’skokhozyaystvennykh mashin [Hydraulic Drive of Mobile Agricultural Machines]. Gomel, Belarus: Sukhoi State Technical University of Gomel, 2013, p. 102.
[13] S. V. Pyanzov, “Sovershenstvovanie stenda i metodiki dlya kontrolya tekhnicheskogo sostoyaniya ob’emnykh gidroprivodov sel’skokhozyaystvennoy tekhniki” [Improvement of a test stand and methodology for monitoring the technical condition of volumetric hydraulic drives of agricultural machinery], Author’s Abstract of Dissertation, Saransk, Russia, 2021, pp. 1–4.
[14] V. B. Popov, Gidroprivod mobil’nykh sel’skokhozyaystvennykh mashin [Hydraulic Drive of Mobile Agricultural Machines]. Gomel, Belarus: Sukhoi State Technical University of Gomel, 2013, p. 102.
[15] B. M. Azimov and J. Sh. Norqulov, “Avtomatlashtirilgan sinash stendining paxta terish mashinasi pnevmotizimi ventilyatorining gidromotorli yuritmasi harakatini optimal boshqarish algoritmi,” Hisoblash va Amaliy Matematika Muammolari, no. 2/2(66), pp. 144–152, 2025.
[16] B. M. Azimov and J. Sh. Norqulov, “Modeling and optimal control of the hydromotor-driven fan motion in the pneumatic system of a cotton harvesting machine using an automated test bench,” Informatsionnye Tekhnologii Modelirovaniya i Upravleniya, no. 3(141), pp. 164–176, 2025.